B163 - SECO B163 - Bronco II Drive

B163 - SECO B163 Bronco II DC Drive | 115/230 Volts 1...

SECO B163 Bronco II DC Drive | 115/230 Volts 1 Phase | Start-Stop, Run-Job, Forward-Reverse Simple Type: DC Drive

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

AC Line Protection Fuse
Circuit Protection
Control Relay with 30wire Start/Stop Circuit
Dual Voltage Input
Field Programmable Jumpers
Field Supply for Shunt Wound Motors
Full wave power conversion circuit with 1 (SCR) and 3 diodes providing NEMA Code K, DC armature supply
IR Compensation Adjustment
Jog at Potentiometer Speed
Local or Remote Operator Control
Maximum and Minimum Speed Adjustments
Speed Regulation
Torque Control

General

115 VAC Supply: Armature Voltage 0–90 VDC; Field Voltage 50/100 VDC
230 VAC Supply: Armature Voltage 0–180 VDC; Field Voltage 100/200 VDC
AC Line Frequency: 50/60 Hz ± 2 Hz
AC Line Input Voltage: 115 or 230 VAC ±10%
Acceleration: 1–5 seconds (Linear, 0 to top speed)
Altitude: To 3300 feet (1000m)
Ambient Temperature: 0–55°C
Current Range: 2.5, 5, 7.5, 10 Amps DC
Duty: Continuous
Horsepower Range: 115 VAC-1/4–1 HP; 230 VAC-1/2–2 HP
IR Compensation: Adjustable
Line Protection: Fuse
Maximum Load Capacity: 150% for 1 minute
Maximum Speed: 75–110% of motor base speed
Minimum Speed: 0–30% of motor base speed
Nominal: (Adjustable to 150% of each range)
Relative Humidity: 5–95% non-condensing
Service Factor: 1.0
Speed Range: 30:1 with armature voltage feedback; 50:1 with tach-generator feedback
Speed Regulation (As % of motor base speed) for 95% load change: Armature Voltage Feedback ± 2%; Tachometer Feedback 1/2–1%