SE2002 - Seco SE2002 Motors & Drives

SE2002 - Seco SE2002 Motors & Drives - DC Drive .25-2 HP...

Seco SE2002 Motors & Drives - DC Drive .25-2 HP Simple Type: Motor & Drive

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

AC Supply Frequency
Chassis unit
Circuit protection
Control relay with three wire Start/Stop circuit
Diagnostic Status
Field Supply with Field Loss Circuit
Full wave power conversion circuit with two SCR’s and three diodes providing NEMA Code K, DC armature supply
Isolation
Jog
Overcurrent Protection
SE2000 series
Tachometer generator feedback
Torque and Slope Control

General

AC Line Frequency: 50/60 Hz ± 2 Hz, Single Phase
AC Line Input Voltage: 115 or 230 V ±10%
Acceleration: 0.3 to 30 seconds
Acceleration/Deceleration: Range A By current limit | Range B 3–30 seconds | Range C 0.3–3 seconds
Altitude: To 3300 ft. (1000m)
Ambient Temperature: Chassis Model 55°C | Enclosed Model 40°C
Armature Voltage: ± 2%
Current Range: SE2002: 2, 3, 4, 6, 10 amps DC nominal
Current Range (Torque): 15–150%
Deceleration: 0.3 to 30 seconds
Horsepower Range: 115 VAC 1/4–1 HP | 230 VAC 1/2–5 HP in two models
Maximum Speed: 70–105% of motor base speed
Minimum Speed: 0–30% of motor base speed
Relative Humidity: 95% non condensing
Speed Range: 30:1 (arm fdbk) | 50:1 (tach fdbk)
Tachometer Feedback: ± 0.5% (depending on tach generator)